Cisco 8961 - Set Default Router Field; Set DHCP Enabled Field; Set IP Address Field; Set Subnet Mask Field

Set DHCP Enabled Field
Procedure
Step 1
Scroll to the DHCP Enabled option.
Step 2
Press No to disable DHCP, or press Yes to enable DHCP.
Set IP Address Field
Procedure
Step 1
Set the DHCP Enabled option to No.
Step 2
Scroll to the IP Address option, press Select, and enter a new IP Address.
Step 3
Press Apply.
Set Subnet Mask Field
Procedure
Step 1
Set the DHCP Enabled option to No.
Step 2
Scroll to the Subnet Mask option, press Select, and enter a new subnet mask.
Step 3
Press Apply.
Set Default Router Field
Procedure
Step 1
Set the DHCP Enabled option to No.
Step 2
Scroll to the appropriate Default Router option, press Select, and enter a new router IP address.
Step 3
Press Apply.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
116
Cisco Unified IP Phone Settings
Set DHCP Enabled Field
REVIEW DRAFT - CISCO CONFIDENTIAL