Cisco 8961 - Page 160

Configuration ReferenceDescriptionFeature
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
“Cisco Unified IP Phone
Configuration” chapter
•
Cisco Unified Communications
Manager Features and Services
Guide, “Call Display Restrictions”
chapter
Determines the information that displays for calling or
connected lines, depending on the parties who are
involved in the call.
Call Display Restrictions
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
“Directory Number Configuration”
chapter
•
Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phone” chapter
•
Customize User Options Web Page
Display, on page 183
Allows users to redirect incoming calls to another
number. Call forward options include Call Forward All,
Call Forward Busy, Call Forward No Answer, and Call
Forward No Coverage.
Call forward options can be assigned on a per-line basis.
Call Forward
For more information, see “Cisco Unified
IP Phone” chapter in the Cisco Unified
Communications Manager System Guide.
Detects and prevents Call Forward All loops. When a
Call Forward All loop is detected, the Call Forward All
configuration is ignored and the call rings through.
Call Forward All Loop Breakout
For more information, see “Cisco Unified
IP Phone” chapter in the Cisco Unified
Communications Manager System Guide.
Prevents a user from configuring a Call Forward All
destination directly on the phone that creates a Call
Forward All loop or that creates a Call Forward All
chain with more hops than the existing Forward
Maximum Hop Count service parameter allows.
Call Forward All Loop
Prevention
For more information, see
“Understanding Directory Numbers”
chapter in the Cisco Unified
Communications Manager System Guide.
Allows you to override Call Forward All (CFA) in cases
where the CFA target places a call to the CFA initiator.
This feature allows the CFA target to reach the CFA
initiator for important calls. The override works whether
the CFA target phone number is internal or external.
Call Forward Destination
Override
For more information, see Call Forward
Notification Setup, on page 185.
Allows you to configure the information that the user
sees upon receiving a forwarded call.
Call Forward Notification
For more information, see Enable Call
History Display Enhancement, on page
198.
Displays only the call history of a selected line.Call History Display
Enhancement
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
136
Features, Templates, Services, and User Setup
Telephony features available for Cisco Unified IP Phone
REVIEW DRAFT - CISCO CONFIDENTIAL