Cisco 8961 - Page 187

NotesSupportedFeature
NoTransfer to Active Calls (Direct
Transfer)
YesAuto Answer
YesCall Waiting
YesCaller ID
YesAudible Message Waiting Indicator
YesAll Calls Programmable Line Key
YesAnswer Programmable Line Key
Conference is the only feature
supported due to other feature
limitations.
YesUnified Session Presentation
Voicemail will not be synchronized
with other users in the Cisco
Unified Communications Manager
cluster.
YesVoicemail
Forward state is only available on
the phone that sets the forward
because there are no shared line
appearances in SRST mode. The
Call Forward All settings are not
preserved on failover to SRST from
the Cisco Unified Communications
Manager, or from SRST fail-back
to the Communications Manager.
Any original Call Forward All still
active on the Communications
Manager should be indicated when
the device reconnects to the
Communications Manager after
failover.
YesCall Forward All
YesSpeed Dial
YesService IRL Programmable Line
Key
The iDivert softkey does not
display.
NoTo Voicemail (iDivert)
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
163
Features, Templates, Services, and User Setup
Survivable Remote Site Telephony
REVIEW DRAFT - CISCO CONFIDENTIAL