Cisco 8961 - Page 223

Table 35: Custom Line Filter Fields
DescriptionField
A comma-separated list of phone device names to be included in the default filter.
By default, the list is blank, and all provisioned lines are checked.
Default line filter
Custom line filters are set in the following window:
•
Device > Phone
Set Up Default Line Filter
Procedure
Step 1
Go to Cisco Unified Communications Manager Administration and choose:
•
Device > Phone
Step 2
Locate the Default Line Filter field and enter the line DN. Separate device name entries with a comma.
The specified line is added to the default filter.
Set up Separate Audio and Video Mute
You can control the ability of your users to mute the audio on a call.
Procedure
Step 1
In Cisco Unified Communications Manager Administration, select System > Enterprise Phone Configuration.
Step 2
To enable the feature, set the Separate Audio and Video parameter to Enabled.
Step 3
Select Save.
Enable Softkey Policy Control
Softkey Policy Control enables you to configure the following features as softkeys or programmable feature
buttons:
•
Malicious Caller ID
•
Pick Up
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
199
Features, Templates, Services, and User Setup
Set up Separate Audio and Video Mute
REVIEW DRAFT - CISCO CONFIDENTIAL