Table 36: Cisco VXC VPN fields
Parameter descriptionParameter name
This field enables or disables the Cisco VXC VPN
feature. When you populate this field, the phone
allows traffic from the device with the specified MAC
address and that connects to the phone PC Port to
access the tunnel.
•
When this field is blank, the phone does not
establish a Cisco VXC VPN tunnel.
•
When this field specifies one broadcast MAC
address (FFFFFFFFFFFF), the phone establishes
the Cisco VXC VPN tunnel and allows any
connected Cisco VXC 2111/2112 device to
access the tunnel.
•
When this field specifies one nonbroadcast
MAC address, the phone establishes the Cisco
VXC VPN tunnel and allows only the Cisco
VXC device with the specified MAC address
to access the tunnel.
By default, this field is blank.
Enable VXC VPN for MAC
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
204
Features, Templates, Services, and User Setup
Cisco VXC VPN Setup
REVIEW DRAFT - CISCO CONFIDENTIAL
To Next Page
Loading...
