Status Menu
The Status menu includes the following options, which provide information about the phone and phone
operations:
•
Status Messages: Displays the Status Messages screen, which shows a log of important system messages.
•
Ethernet Statistic: Displays the Ethernet Statistics screen, which shows Ethernet traffic statistics.
•
Wireless Statistics: Displays the Wireless Statistics screen, if applicable.
•
Call Statistics: Displays counters and statistics for the current call.
•
Current Access Point: Displays the Current Access Point screen, if applicable.
Display Status Menu
To display the Status menu, perform these steps:
Procedure
Step 1
To display the Status menu, press Applications.
Step 2
Select Administrator Settings > Status.
Step 3
To exit the Status menu, press Exit.
Status Messages Screen
The Status Messages screen displays the 30 most recent status messages that the phone has generated. You
can access this screen at any time, even if the phone has not finished starting up. Status Messages, on page
228 describes the status messages that might appear. This table also includes actions you can take to address
errors.
Display Status Messages Screen
To display the Status Messages screen, follow these steps:
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
227
Model information, status, and statistics
Status Menu
REVIEW DRAFT - CISCO CONFIDENTIAL
To Next Page
Loading...
