Ensure that the power cord and any other cable that does not terminate in the wall behind the bracket are
positioned in one of the cable-access openings in the bottom of the bracket. The phone and wall bracket
openings together form circular openings with room for one cable per opening.
Figure 14: Attach the Phone to the Wall Bracket
Step 5
Use the locking key to lock the phone to the wall bracket.
Step 6
Proceed to Adjust Handset Rest, on page 324
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
323
Cisco Unified IP Phone Wall Mount
Install Bracket for Phone with KEM
REVIEW DRAFT - CISCO CONFIDENTIAL
To Next Page
Loading...
