Cisco ASR 1000 Series - Page 123

5-11
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 5 Preparing Your Site for Installation
Site Planning
The following list describes additional Cisco ASR 1000 Series chassis characteristics:
• Cisco ASR 1001 Router:
– Chassis height meets EIA-310 rack spacing 1RU (1.71 in./43.43 mm), universal rack-mount
– Chassis width meets EIA-310 19-in. (17.3 in./439.42 mm) wide with rack brackets
– Cable-management brackets allow a bend radius of 1.5 in. (38.1 mm) for cables
– Ships with forward rack-mount brackets installed and an extra set included in the accessory kit
• Cisco ASR 1002 Router and Cisco ASR 1002-X Router:
– Chassis height meets EIA-310 rack spacing 2RU (3.47 in./ 88.138 mm), universal rack-mount
– Chassis width meets EIA-310 19-in. (17.25 in./438.15 mm) wide with rack brackets
– Cable-management brackets at the Cisco ASR 1002 Router location can hold 16 ports of
STP/UTP RJ 45 cables
– Cable-management brackets allow a bend radius of 1.5 in. (38.1 mm) for cables
– Adjustable rack-mount brackets allow for a front to rear rail variance distance of 15.50 in./394
mm to 19.00 in./482.6 mm
• Cisco ASR 1004 Router:
– Chassis height meets EIA-310 rack spacing 4RU (6.95 in./176.53 mm), universal rack-mount
– Chassis width meets EIA-310 19-in. (17.25 in./438.15 mm) wide with rack brackets
– Cable-management brackets at each Cisco ASR 1000 Series SPA Interface (SIP) locations can
hold 16 ports of STP/UTP RJ 45 cables
– Cable-management brackets allow a bend radius of 1.5 in. (38.1 mm) for cables
– Adjustable rack-mount brackets allow for a front to rear rail variance distance of 15.50 in./394
mm to 19.00 in. /482.6 mm
• Cisco ASR 1006 Router:
– Chassis height meets EIA-310 rack spacing 6RU (10.47 in./266 mm), universal rack-mount
– Chassis width meets EIA-310 19-in. (17.25 in./438.15 mm) wide with rack brackets
– Cable-management brackets at each Cisco ASR 1000 Series SPA Interface (SIP) locations can
hold 16 ports of STP/UTP RJ 45 cables
– Cable-management brackets allow a bend radius of 1.5 in. (38.1 mm) for cables
– Adjustable rack-mount brackets allow for a front to rear rail variance distance of 15.50/394mm
to 19.00/482.6mm
• Cisco ASR 1013 Router:
– Chassis height meets EIA-310 rack spacing 13RU (22.8 in./579.12 mm), universal rack-mount
– Chassis width meets EIA-310 19-in. (17.25 in./438.15 mm) wide with rack brackets
– Cable-management brackets allow a bend radius of 1.5 in. (38.1 mm) for cables
– Adjustable rack-mount brackets allow for a front to rear rail variance distance of 15.50/394mm
to 19.00 in./482.6 mm
– Ships with forward rack-mount brackets installed and an extra set in the accessory kit
1. Unless otherwise noted, the physical characteristics for the Cisco ASR 1002-F Router and Cisco ASR 1002-X Router remain the same as those for the
Cisco ASR 1002 Router.