Cisco ASR 1000 Series Hardware Installation Guide

1-18
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 1 Cisco ASR 1000 Series Routers Hardware Overview
Cisco Product Identification Standard
• Operating expense reduction— The Cisco UDI provides accurate and detailed network inventory
information; identifying each Cisco product in a network element through a standard interface.
Cisco operating systems can view and use this data, allowing you to automate your electronic
inventory.
• Consistency across product layers—The UDI is designed into hardware products and cannot
overwritten in error. Operating and management systems discover the UDI through standard
interfaces and display the UDI in standard outputs. Standard interfaces include the IETF standard
ENTITY-MIB.
Note Go to the following URL for complete information on the product identification standard:
http://www.cisco.com/go/udi/
Serial Number Label Location
This section contains graphics of each chassis showing the location of the serial number label:
• Cisco ASR 1006—Figure 1-1 on page 1-19
• Cisco ASR 1004—Figure 1-2 on page 1-20
• Cisco ASR 1002—Figure 1-3 on page 1-21
• Cisco ASR 1002-F—Figure 1-4 on page 1-22
• Cisco ASR 1013—Figure 1-5 on page 1-23
• Cisco ASR 1001—Figure 1-6 on page 1-24
• Cisco ASR 1002-X—Figure 1-7 on page 1-25

Cisco ASR 1000 Series Specifications

General

Series	ASR 1000
Category	Network Router
Operating System	Cisco IOS XE
Memory	Up to 64 GB
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC options
Dimensions	Varies by model
Encryption	IPsec, SSL
Storage	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model