EasyManuals Logo

Cisco ASR 1000 Series Hardware Installation Guide

Cisco ASR 1000 Series
594 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
2-21
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 2 Cisco ASR 1000 Series Routers Component Overview
Cisco ASR 1000 Series Router Power Supplies
Cisco ASR 1000 Series Router Power Supplies
All Cisco ASR 1000 Series Router configurations support AC and DC power supply options. The
modular chassis configurations support the installation of two power supplies for redundancy. When an
external power supply fails or is removed, the other power supply provides power requirements for the
chassis.
You are required to always have two power supplies installed in the chassis to insure sufficient cooling
for the box. The system fans are inside the power supply unit and must spin for cooling. No Cisco
ASR 1000 Series Router will operate for more than two to three minutes without two power supplies
installed. Since all the system fans can be powered by one power supply, it is not required for the second
power supply unit to be powered on, but it must be installed. Cisco IOS software specifically looks for
two power supplies in the chassis and will automatically initiate a shutdown if only one power supply is
detected.
This section contains the following topics:
Power Supply Requirements for All Cisco ASR 1000 Series Routers, page 2-21
Power Supplies for the Cisco ASR 1006 Router, page 2-23
Power Supplies for the Cisco ASR 1004 Router, page 2-29
Power Supplies for the Cisco ASR 1002 Router, page 2-36
Power Supplies for the Cisco ASR 1013 Router, page 2-44
Power Supplies for the Cisco ASR 1001 Router, page 2-49
Power Supply Requirements for All Cisco ASR 1000 Series Routers
This section contains power supply specifications for all Cisco ASR 1000 Series Routers. The following
topics are covered:
DC power supply input ratings and circuit breaker specifications
Maximum and minimum Amps for the branch circuit breakers
Maximum and minimum size of the AWG wire required for each circuit breaker.
AC and DC power supply types
AC and DC power supply ratings
DC Power System Input Requirements for Cisco ASR 1000 Series Routers
The DC power supply for the Cisco ASR 1006, Cisco ASR 1004, Cisco ASR 100, Cisco ASR 1013, and
Cisco ASR 1001 routers operate at individual specifications.

Table of Contents

Other manuals for Cisco ASR 1000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 1000 Series and is the answer not in the manual?

Cisco ASR 1000 Series Specifications

General IconGeneral
SeriesASR 1000
CategoryNetwork Router
Operating SystemCisco IOS XE
MemoryUp to 64 GB
Interfaces10 Gigabit Ethernet
Power SupplyAC or DC options
DimensionsVaries by model
EncryptionIPsec, SSL
StorageVaries by model
Operating Temperature32°F to 104°F (0°C to 40°C)
Humidity5% to 95% non-condensing
MTBFVaries by model

Related product manuals