Cisco ASR 1000 Series Hardware Installation Guide

6-36
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 6 Cisco ASR 1006 Router Overview and Installation
Attaching Cable Retention Bracket on AC Power Supply
Attaching Cable Retention Bracket on AC Power Supply
This section explains how to attach the cable retention bracket on AC power supply of the chassis.
Figure 6-27 shows the cable retention bracket attaching to the AC power supply.
Figure 6-27 Cable Retention Bracket Attaching to the AC Power Supply
Step 1 Remove the two M3X5mm screws and discard.
Step 2 Install AC cord retainer by inserting tabs into lance features on panel.
Step 3 Secure AC cord retainer with two M3X8mm screws included in kit.
Step 4 Connect AC power cord.
Step 5 Secure AC cord by tightening retainer screw.
364539
1
3
4
5
2

Cisco ASR 1000 Series Specifications

General

Series	ASR 1000
Category	Network Router
Operating System	Cisco IOS XE
Memory	Up to 64 GB
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC options
Dimensions	Varies by model
Encryption	IPsec, SSL
Storage	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model