Cisco ASR 1000 Series - Page 279

9-25
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 9 Cisco ASR 1002-F Router Overview and Installation
Attaching a Chassis Ground Connection
Step 2 Insert the AWG #6 wire into the wire receptacle on the grounding lug as shown in Figure 9-19.
Figure 9-19 Attaching the Ground Wire to the Grounding Lug
Step 3
Use the manufacturers’s recommended crimping tool to carefully crimp the wire receptacle around the
wire; this step is required to ensure a proper mechanical connection.
Step 4 Locate the chassis ground connector on the side of your chassis as shown in Figure 9-18.
Step 5 Insert the two screws through the holes in the grounding lug as shown in Figure 9-20.
Figure 9-20 Attaching a Grounding Lug to the Chassis Ground Connector
1 Ground wire 3 Ground lug screws
2 Grounding lug 4 Chassis ground connector holes
280186
4
1
2
3
1 Chassis ground connector 2 Ground symbol
280284
1
2