10-25
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 10 Cisco ASR 1002-X Router Overview and Installation
Attaching the Cable Management Bracket
Step 1 Align the cable management bracket to the rack mount bracket on one side of the Cisco ASR 1002-X
Router. The cable management bracket aligns to the top hole of the chassis rack mount bracket.
Step 2 Using a Phillips screwdriver, insert the screw through cable management bracket and into the chassis
rack mount and tighten the screw. Use the package of four screws shipped with the router.
To Next Page
Loading...
