Cisco ASR 1000 Series - Page 322

10-32
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 10 Cisco ASR 1002-X Router Overview and Installation
Cisco ASR 1002-X Router Power Supplies
Figure 10-19 shows the various parts of the Cisco ASR 1002-X Router AC power supply.
Figure 10-19 Cisco ASR 1002-X Router AC Power Supply Labels
Step 2 Insert the AC power cable into the power supply AC inlet.
Step 3 To ensure that the AC power cord does not interfere with other cables or wires, dress the AC power cable
in one of the following ways.
• Leave a small service loop in the AC power cord from the inlet and then secure the power cord
through the AC power supply handle, as shown in Figure 10-20.
Figure 10-20 Positioning the Cisco ASR 1002-X Router AC Power Supply and Cord in Slot 1
1 Chassis ESD socket 5 AC power supply fan
2 AC power supply slot number 0 6 AC power supply captive installation screw
3 AC power supply On (|) /Off (O) switch 7 AC power supply slot number 1
4 AC power supply LEDs 8 AC power inlet
OUTPUT INPUT
FAIL
OK OK
FAN OUTPUT INPUT
FAIL
OK OK
FAN
This unit might have more than
one power supply connection.
All connections must be removed
to de-energize the unit.
This unit might have more than
one power supply connection.
All connections must be removed
to de-energize the unit.
0
1
8 7
280288
41 5 63
2
1 AC power cord
280383
OUTPUT INPUT
FAI L
OK OK
FAN
This un
it might hav
e more th
a
n
one power su
pply connection.
All connection
s
m
us
t be removed
to de-energize the unit
.
1