Cisco ASR 1000 Series - Page 4

xviii
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Preface
OL-13208-09 March 2011 Added information about:
• IDC-HD80G, IDC-4XGE, and IDC-CHT1/E1
integrated daughter cards on the Cisco ASR 1001
Router—See the “Cisco ASR 1001 Router
Description” section on page 317 for detailed
information.
• MIBs for the new IDCs—See the Appendix D,
“MIBs for the Cisco ASR 1001 Router” appendix for
the list of MIBs.
• Cisco ASR 1013 Router power supplies on the Cisco
ASR 1006 Router—Information about this new
feature has been added in various sections in this
guide.
OL-13208-08 November 2010 Added information about:
• New Cisco ASR 1001 Router at Cisco ASR 1001
Router Description, page 317
• Cisco ASR1000-SIP40 and Cisco ASR1000-ESP40
products on the Cisco ASR 1004 Router
OL-13208-07 July 2010 Added information about Cisco ASR 1000 Series
Routers 40G products:
• Cisco ASR 1013 Router Overview and Installation,
page 279
• Cisco ASR 1000-ESP40, page 81
• Cisco ASR 1000 Series SPA Interface Processor,
page 90
• Supported ASR 1000 Hardware Components,
page 29
OL-13208-06 November 2009 Added information about the Cisco +24 VDC power
supply in the Cisco ASR 1002 Router. See the following
sections: Cisco ASR 1002 Router +24 VDC Power
Supply, page 67, Connecting Power to the Cisco ASR
1006 Router, page 149, and Removing and Replacing the
Cisco ASR 1002 Router Power Supplies, page 447.
OL-13208-05 June 2009 Added information about the Cisco ASR 1002-F Router.
Note Unless otherwise noted, the Cisco ASR 1002-F
Router supports all the general-purpose routing
and security features of the Cisco ASR 1002
Router and uses the same internal control and
data-plane architecture as Cisco ASR 1002
Router and the Cisco ASR 1002-F Router is
supported only by Cisco software release four
code.
Document
Version Date Change Summary