Cisco ASR 1000 Series - Page 409

12-35
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 12 Cisco ASR 1001 Router Overview and Installation
Cisco ASR 1001 Router Power Supply Installation
Figure 12-23 shows the Cisco ASR 1001 Router AC power supply standby switch.
Figure 12-23 Cisco ASR 1001 Router AC Power Supply Standby Switch
Step 2
Turn off the circuit breaker to the power supply.
Step 3 For easier installation, plug the power cable into the inlet on power supply slot 1 first.
Step 4 Then insert the power supply cable into the power supply in slot 0 on the right.
1 Cisco ASR 1001 Router Standby switch, which does not disconnect power from the power source.
207695
1