14-66
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 14 Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Removing and Replacing the Cisco ASR 1006 Router Power Supplies
Figure 14-46 shows the terminal block ground lugs for the ASR1006-PWR-DC power supply of the
Cisco ASR 1006 Router.
Figure 14-46 Cisco ASR 1006 Router DC Power Supply (ASR1006-PWR-DC) Terminal Block Ground
Lugs
1 Negative lug and wire with sleeving wrapped
around the wire and end of lug
3 Protective sleeving area
2 Positive lug and wire with sleeving wrapped
around the wire and end of lug
4 Ground stud and cable
This unit might have more than one power supply connection. All connections must be removed to de-energ
OFF
-48/-60V 40A
280024
1 2
4
3
To Next Page
Loading...
