Cisco ASR 1000 Series - Page 6

xx
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Preface
Chapter and Appendix Description
Preface The preface provides objectives, audience and
organization of this manual.
Chapter 1, “Cisco ASR 1000 Series Routers Hardware Overview” This chapter provides an overview of the Cisco
ASR 1000 Series Aggregation Services Routers.
Chapter 2, “Cisco ASR 1000 Series Routers Component
Overview”
This chapter provides an overview of the hardware
components for the Cisco ASR 1000 Series Aggregation
Services Routers.
Chapter 3, “Cisco ASR 1000 Series Routers Embedded Services
Processors”
This chapter describes the Cisco ESPs for the ASR 1000
platform routers.
Chapter 4, “Cisco ASR 1000 Series Router SPA Interface
Processors (SIPs)”
This chapter describes the Cisco SIPs for the ASR 1000
platform routers.
Chapter 5, “Preparing Your Site for Installation” This chapter provides site preparation guidelines for
installing the ASR 1000 Series Routers.
Chapter 6, “Cisco ASR 1006 Router Overview and Installation” This chapter describes the Cisco ASR 1013 router and
how to install it.
Chapter 7, “Cisco ASR 1004 Router Overview and Installation” This chapter describes the Cisco ASR 1004 router and
how to install it.
Chapter 8, “Cisco ASR 1002 Router Overview and Installation” This chapter describes the Cisco ASR 1002 router and
how to install it.
Chapter 9, “Cisco ASR 1002-F Router Overview and Installation” This chapter describes the Cisco ASR 1002-F router and
how to install it.
Chapter 10, “Cisco ASR 1013 Router Overview and Installation” This chapter describes the Cisco ASR 1013 router and
how to install it.
Chapter 11, “Cisco ASR 1001 Router Overview and Installation” This chapter describes the Cisco ASR 1001 router and
how to install it.
Chapter 12, “Cisco ASR 1002-X Router Overview and
Installation”
This chapter describes the Cisco ASR 1002-X router and
how to install it.
Chapter 12, “Cisco ASR 1000 Series Routers Power Up and Initial
Configuration”
This chapter provides basic system startup and initial
configuration information.
Chapter 13, “Removing and Replacing FRUs from the Cisco ASR
1000 Series Routers”
This chapter provides instructions for removing and
replacing shared port adapters, ASR 1000 RP1 internal
hard drive, AC and DC power supplies, the Cisco
ASR 1000 ESP forwarding processors, the Cisco DIMM
memory cards, the Cisco memory stick, and the Cisco
ASR 1000 Series Route Processors.
Appendix A, “Cisco ASR 1000 Series Router Specifications” This appendix provides system specifications and
pinouts.
Appendix B, “Cisco ASR 1000 Series Router Route Processor and
Embedded Services Processor Signals and Pinouts”
This appendix lists pinout specifications for the Cisco
ASR1000-RP1 and the Cisco ASR1000-RP2.
Appendix C, “Troubleshooting Initial Startup Problems” This appendix provides basic system startup
troubleshooting information.