Cisco ASR-920-12SZ-IM Hardware Installation Guide

Figure 3: Rear View of Cisco ASR-920-12SZ-IM Router
Air vents3Fan tray1
—
Grounding lug2
The following table describes the other features of Cisco ASR-920-12SZ-IM (AC and DC) Router.
Table 1: Cisco ASR-920-12SZ-IM Router Specifications
ASR-920-12SZ-IMSpecification
17.5 x 9.88 x 1.73 inchesDimensionWidth x Depth x Height
Total weight: 4.83 kg
Weight of PSU: 0.59 kg
Weight of Fan: 0.33 kg
Weight
One RURack Unit
Front to backAirflow
Front cable accessCable access
60 Gbps, 95 MppsSystem throughput
Power Supply
YesRedundant
YesAC
85V AC to 264V AC, nominal 100/240 VACVoltage Range
47 Hz to 63 Hz, nominal 50/60 HzFrequency Range
360 WMaximum Power
YesDC
Cisco ASR-920-12SZ-IM Aggregation Services Router Hardware Installation Guide
6
Cisco ASR 920 Series Aggregation Services Router Overview
SFP+ Ports

Cisco ASR-920-12SZ-IM Specifications

General

DSL WAN	No
Ethernet WAN	Yes
Networking standards	IEEE 802.3x
Ethernet LAN data rates	10, 100, 1000, 10000 Mbit/s
USB ports quantity	2
Ethernet LAN (RJ-45) ports	8
Product color	Gray
Rack capacity	1U
Antenna type	Not supported
AC input voltage	100 - 240 V
Power source type	AC, DC, PoE
AC input frequency	50 - 60 Hz
Power consumption (typical)	130 W
Non-operating altitude	0 - 4570 m
Operating temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	5 - 95 %
Safety	UL 60950-1, 2005, CAN/CSA C22.2 No. 60950-1: 2005, IEC 60950-1, 2005, EN 60950-1, 2005, AS/NZS 60950.1:2005
Electromagnetic compatibility	FCC CFR47 Part 15 Class A
Mean time between failures (MTBF)	407230 h
Firewall	-
Security algorithms	IPSec

Weight and Dimensions

Depth	286.54 mm
Width	444.5 mm
Height	44 mm
Weight	4830 g