Cisco Catalyst 3750 Hardware Installation Guide

Chapter 2 Product Overview
Front Panel Description
2-4
Catalyst 3750 Switch Hardware Installation Guide
78-15136-03
Front Panel Description
The Catalyst 3750-24TS 10/100 ports are numbered 1 through 24. The ports are
grouped in pairs. The first member of the pair (port 1) is above the second member
(port 2), as shown in Figure 2-1. Port 3 is above port 4, and so on. The SFP
module slots are numbered 1 (left) and 2 (right).
Figure 2-1 Catalyst 3750-24TS Front Panel
The 10/100/1000 ports on the Catalyst 3750G-24T and 3750G-24TS are grouped
in pairs. The first member of the pair (port 1) is above the second member (port 2),
as shown in Figure 2-2 and Figure 2-3. Port 3 is above port 4, and so on. In
Figure 2-3, the SFP module slots are numbered 25 to 28.
1 10/100 ports 2 SFP module slots
Catalyst 3750
S
E
R
IE
S
SYST
RPS
MASTR
STAT
DUPLX
SPEED
STACK
M
O
D
E
13X
14X
23X
24X
1X
2X
11X
12X
1
2
1
2
3
4
5
6
7
8
9
1
0
1
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
2
0
2
1
2
2
2
3
2
4
2
1
86541

Cisco Catalyst 3750 Specifications

General

Device Type	Switch
Switching Capacity	32 Gbps
Forwarding Rate	38.7 Mpps
Stacking Bandwidth	32 Gbps
RAM	128 MB
Jumbo Frame Support	Yes
Switch Type	Managed
Model	Catalyst 3750 Series
Uplink Interfaces	SFP
Form Factor	Rack-mountable
MAC Address Table Size	12, 000 entries
Routing Protocol	RIP, OSPF, EIGRP
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Layer 3 switching, Layer 2 switching, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, MAC address filtering, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), Cisco EnergyWise technology
Power over Ethernet (PoE)	PoE
Operating Temperature	-5 - 45 °C
Operating Humidity	10% to 85% non-condensing