Cisco Catalyst 3750 - Recommended Cabling Configurations

3-17
Catalyst 3750 Switch Hardware Installation Guide
78-15136-03
Chapter 3 Switch Installation
Planning the Stack
Recommended Cabling Configurations
This section describes the recommended cabling configurations for stacking the
switches.
Stacking Switches in Vertical Racks or on a Table
Figure 3-6 is an example of a recommended configuration using the supplied
0.5-meter StackWise cable. In this example, the switches are stacked in a vertical
rack or on a table. This configuration provides redundant connections.
Figure 3-6 Stacking the Switches in a Vertical Rack or on a Table Using the
0.5-meter StackWise Cable
The configuration examples in Figure 3-7 use the 3-meter StackWise cable in
addition to the supplied 0.5-meter StackWise cable. This configuration also
provides redundant connections.
86586