Cisco Catalyst 3750 - Attaching Brackets to the Catalyst 3750-24 TS, 3750 G-24 T, 3750 G-12 S 3750-24 PS, 3750-48 PS, 3750 G-16 TD, and 3750-48 TS Switches

Chapter 3 Switch Installation
Installing the Switch
3-26
Catalyst 3750 Switch Hardware Installation Guide
78-15136-03
Attaching Brackets to the Catalyst 3750-24TS, 3750G-24T, 3750G-12S, 3750-24PS,
3750-48PS, 3750G-16TD, and 3750-48TS Switches
The bracket orientation and the brackets you use depend on whether you are
attaching the brackets for a 19-inch or a 24-inch rack. For 19-inch racks, use
bracket part number 700-8209-XX; for 24-inch racks, use bracket part number
700-13248-XX. Figure 3-19 through Figure 3-25 show how to attach each type
bracket to one side of the switch. Follow the same steps to attach the second
bracket to the opposite side.
Figure 3-19 Attaching Brackets for 19-Inch Racks, Front Panel Forward
1 Phillips flat-head screws
SYST
RPS
MASTR
STAT
DUPLX
SPEED
STACK
MODE
1X
2X
11X
12X
1
2
3
4
5
6
7
8
9
10
11
12
86560
1