Cisco Catalyst 4500 Series Message Guide

2-124
Catalyst 4500 Series Switch Cisco IOS System Message Guide Release 12.2(31)SGA
OL-11541-01
Chapter 2 Messages and Recovery Procedures
WATCHDOG Messages
Error Message VQPCLIENT-7-PROBE: Probing primary server [IP_address]
Explanation
The system is trying to reestablish connectivity with the primary VMPS at the given IP
address.
Recommended Action This is an informational message only. No action is required.
Error Message VQPCLIENT-7-RECONF: Reconfirming VMPS responses
Explanation The switch is reconfirming all responses with the VMPS.
Recommended Action This is an informational message only. No action is required.
WATCHDOG Messages
This section contains the watchdog (WATCHDOG) message.
Error Message C4K_WATCHDOG-3-CHILDFAILURE:Watchdog failure ([char]) - system may
reset
Explanation
The job [char] was unscheduled and not started soon enough to start its watchdog timer.
Recommended Action Determine what other activity is utilizing the supervisor engine.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E