Cisco Catalyst 4500 Series Message Guide

CHAPTER
1-1
Catalyst 4500 Series Switch Cisco IOS System Message Guide Release 12.2(31)SGA
OL-11541-01
1
System Message Format
This chapter describes the Cisco IOS system message structure and error message traceback report.
This chapter contains the following sections:
• Message Structure, page 1-1
• Error Message Traceback Reports, page 1-4
Message Structure
The message includes the following information:
• Facility code
• Severity level
• Mnemonic code
• Description field
System error messages are structured as follows:
FACILITY-SEVERITY-MNEMONIC: Message-text
Facility Code
The facility code consists of at least two uppercase letters that indicate the facility to which the message
refers. A facility can be a hardware device, a protocol, or a module of the system software. Table 1-1
lists the system facility codes.
Table 1-1 Facility Codes
Code Facility
ACL Access control list
BUFFERMANAGER Memory buffer management
CHASSIS Chassis
COMMONHWACLMAN Common hardware ACL management
COMMONSTUBMAN ASIC-specific messages
DAIMAN Dynamic ARP inspection management

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E