Cisco cBR 8 User Manual

DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Router> enable
•
Enter your password if prompted.
Enters global configuration mode.configure terminal
Example:
Router# configure terminal
Step 2
Configures a control relationship identifier (CR ID) for CMTS.cpd cr-id
Example:
Router (config)# cpd cr-id 100
Step 3
Exits global configuration mode and enters privileged EXEC
mode.
end
Example:
Router# end
Step 4
Examples
The following example shows the cpd cr-id command configured with a cr-id number of 100 on a router.
Router (config)# cpd cr-id 100
Enabling NLS Functionality
To enable the NLS functionality, use the nls command in global configuration mode. It is recommended that
NLS message authentication be enabled at all times.
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration Guide
for Cisco IOS XE Fuji 16.8.x
103
Control Point Discovery
Enabling NLS Functionality

Cisco cBR 8 Specifications

General

Brand	Cisco
Model	cBR 8
Category	Network Router
Language	English