Cisco cBR 8 User Manual

PurposeCommand or Action
Enters call home configuration mode.call-home
Example:
Device(config)# call-home
Step 2
Enables or disables Call Home syslog message throttling and
avoids sending repetitive Call Home syslog messages. By
default, syslog message throttling is enabled.
[no] syslog-throttling
Example:
Device(cfg-call-home)# syslog-throttling
Step 3
Configuring Call Home Data Privacy
The data-privacy command scrubs data, such as passwords and IP addresses, from running configuration
files to protect the privacy of customers. Enabling the data-privacy command can affect CPU utilization
when scrubbing a large amount of data. Currently, show command output is not being scrubbed except for
configuration messages in the show running-config all and show startup-config data.
SUMMARY STEPS
1.
configure terminal
2.
call-home
3.
data-privacy {level {normal | high} | hostname}
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
Device# configure terminal
Step 1
Enters call home configuration mode.call-home
Example:
Device(config)# call-home
Step 2
Scrubs data from running configuration file to protect the privacy of the
user. The default data-privacy level is normal.
data-privacy {level {normal | high} |
hostname}
Step 3
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration
Guide for Cisco IOS XE Fuji 16.8.x
24
Call Home
Configuring Call Home

Cisco cBR 8 Specifications

General

Brand	Cisco
Model	cBR 8
Category	Network Router
Language	English