Cisco cBR 8 - Configuring Syslog Throttling

DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
Device# configure terminal
Step 1
Enters call home configuration mode.call-home
Example:
Device(config)# call-home
Step 2
Enables AAA authorization.aaa-authorization
Step 3
Example:
Device(cfg-call-home)# aaa-authorization
By default, AAA authorization is disabled for
Call Home.
Note
Specifies the username for authorization.
aaa-authorization [username username]
Step 4
Example:
Device(cfg-call-home)# aaa-authorization username
username
• username user—Default username is callhome.
Maximum length is 64.
Configuring Syslog Throttling
To enable or disable Call Home syslog message throttling and avoid sending repetitive Call Home syslog
messages, perform the following steps:
SUMMARY STEPS
1.
configure terminal
2.
call-home
3.
[no] syslog-throttling
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
Device# configure terminal
Step 1
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration Guide
for Cisco IOS XE Fuji 16.8.x
23
Call Home
Configuring Call Home