Cisco cBR 8 - Enabling or Disabling Power Adjustment Using the CLI (Optional)

PurposeCommand or Action
Sets the flap-list counters to zero for one or
more CMs.
clear cable modem {mac-addr | ip-addr | [cable interface] all | ouistring
| reject} } counters
Example:
Router# clear cable modem 172.12.23.45 counters
Step 3
Example:
Router# clear cable modem oui Cisco counters
Example:
Router# clear cable modem reject counters
Example:
Router# clear cable modem c4/0 counters
Example:
Enabling or Disabling Power Adjustment Using the CLI (optional)
The Cisco CMTS can automatically monitor a cable modem’s power adjustments and determine whether a
particular cable modem requires a chance in the power adjustment method. To enable a cable interface to
make automatic power adjustments, and to set the frequency threshold for when those adjustments are made,
use the following procedure, beginning in EXEC mode.
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Router> enable
•
Enter your password if prompted.
Enters global configuration mode.configure terminal
Example:
Router# configure terminal
Step 2
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration
Guide for Cisco IOS XE Fuji 16.8.x
202
Flap List Troubleshooting
Enabling or Disabling Power Adjustment Using the CLI (optional)