Cisco cBR 8 User Manual

SUMMARY STEPS
1.
configure terminal
2.
call-home
3.
contact-email-addr email-address
4.
phone-number +phone-number
5.
street-address street-address
6.
customer-id text
7.
site-id text
8.
contract-id text
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
Router> configure terminal
Step 1
Enters call home configuration mode.call-home
Example:
Router(config)# call-home
Step 2
Assigns the customer’s email address. Enter up to 200 characters
in email address format with no spaces.
contact-email-addr email-address
Example:
Router(cfg-call-home)# contact-email-addr
username@example.com
Step 3
(Optional) Assigns the customer’s phone number.
phone-number +phone-number
Example:
Router(cfg-call-home)# phone-number
+1-222-333-4444
Step 4
The number must begin with a plus (+) prefix, and may
contain only dashes (-) and numbers. Enter up to 16
characters. If you include spaces, you must enclose your
entry within double quotation marks (“ ”).
Note
(Optional) Assigns the customer’s street address where RMA
equipment can be shipped. Enter up to 200 characters. If you include
street-address street-address
Example:
Router(cfg-call-home)# street-address “1234
Any Street, Any city, Any state, 12345”
Step 5
spaces, you must enclose your entry within double quotation marks
(“ ”).
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration
Guide for Cisco IOS XE Fuji 16.8.x
8
Call Home
Configuring Call Home

Cisco cBR 8 Specifications

General

Brand	Cisco
Model	cBR 8
Category	Network Router
Language	English