Cisco cBR 8 User Manual

PurposeCommand or Action
Exits the global configuration mode and enters the privileged
EXEC mode.
exit
Example:
Router(config)# exit
Step 4
Verifying the SNMP Cache Engine Status
Use the show cable snmp cache-status command to display the current SNMP cache engine status.
You must configure the service internal command in global configuration mode to verify the SNMP
cache engine status.
Important
Following is a sample output of the command.
Router# show cable snmp cache-status
Cache engine is ON, age: 5 seconds
Use the test cable snmp counter-show command to display the cache counters information.
Router# test cable snmp counter-show
========== cache counters ==========
ubrcce_snmp_cache_hit_counter:0.
ubrcce_snmp_cache_get_from_lc_counter:1.
ubrcce_snmp_cache_miss_counter:0.
ubrcce_snmp_cache_ipc_fail_counter:0.
ubrcce_snmp_cache_buffer_full_counter:0.
hit and mis are the historic information for the SNMP cache after the system bootup. hit indicates the number
of times the SNMP queries are hit in the cache and mis indicates the number of times the SNMP queries are
missed in the SNMP cache.
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration
Guide for Cisco IOS XE Fuji 16.8.x
84
SNMP Engine Enhancement
Verifying the SNMP Cache Engine Status

Cisco cBR 8 Specifications

General

Brand	Cisco
Model	cBR 8
Category	Network Router
Language	English