CHAPTER 7
Usage-Based Billing (SAMIS)
This document describes the Usage-based Billing feature for the Cisco Cable Modem Termination System
(CMTS) routers, which provides subscriber account and billing information in the Subscriber Account
Management Interface Specification (SAMIS) format. The SAMIS format is specified by the Data-over-Cable
Service Interface Specifications (DOCSIS) Operations Support System Interface (OSSI) specification.
Finding Feature Information
Your software release may not support all the features that are documented in this module. For the latest
feature information and caveats, see the release notes for your platform and software release. The Feature
Information Table at the end of this document provides information about the documented features and lists
the releases in which each feature is supported.
Use Cisco Feature Navigator to find information about the platform support and Cisco software image
support. To access Cisco Feature Navigator, go to the link http://tools.cisco.com/ITDIT/CFN/. You do not
require a cisco.com login account.
Contents
•
Hardware Compatibility Matrix for the Cisco cBR Series Routers, page 122
•
Prerequisites for Usage-Based Billing (SAMIS), page 122
•
Restrictions for Usage-based Billing, page 123
•
Information About Usage-based Billing, page 124
•
How to Configure the Usage-based Billing Feature, page 135
•
Monitoring the Usage-based Billing Feature, page 180
•
Configuration Examples for Usage-based Billing, page 181
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration Guide
for Cisco IOS XE Fuji 16.8.x
121
To Next Page
Loading...
