Cisco cBR 8 - Example: Configuring HTTP Transport for Call Home on the Cisco Cbr Series Router

destination address email call-home@cisco.com
subscribe-to-alert-group configuration
subscribe-to-alert-group crash
subscribe-to-alert-group diagnostic severity debug
subscribe-to-alert-group environment severity debug
subscribe-to-alert-group inventory
subscribe-to-alert-group syslog severity major pattern .*
subscribe-to-alert-group syslog severity notification pattern "^.+UPDOWN.+changed state
to (down|up)$"
subscribe-to-alert-group snapshot periodic daily 12:00
!
ip route vrf smart-vrf 173.36.13.143 255.255.255.255 172.22.11.1
!
Example: Configuring HTTP Transport for Call Home on the Cisco cBR Series
Router
Step 1
Back up the current running configuration file.
Step 2
Verify the built-in router certificates.
Example:
Router# show crypto pki trustpool | include Class 3 Public
ou=Class 3 Public Primary Certification Authority
ou=Class 3 Public Primary Certification Authority
Step 3
(Optional) Configure VRF.
Example:
Router(config)# vrf def smart-vrf
Router(config-vrf)# address-family ipv4
Router(config-vrf-af)# exit-address-family
Router(config-vrf)# address-family ipv6
Router(config-vrf-af)# exit-address-family
Step 4
Set up the network interface.
Example:
Router(config)# interface TenGigabitEthernet4/1/1
Router(config)# vrf forward smart-vrf
Router(config-if)# ip address 172.22.11.25 255.255.255.128
Router(config-if)# no ip proxy-arp
Router(config-if)# no shut
If IPv6 is enabled, you must configure the IPv6 address.Note
Step 5
Set up the Cisco portal.
Example:
Router(config)# ip host tools.cisco.com 72.163.4.38
Router(config)# ip route vrf smart-vrf 72.163.4.38 255.255.255.255 172.22.11.1
Step 6
Verify the data path.
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration
Guide for Cisco IOS XE Fuji 16.8.x
42
Call Home
Example: Configuring HTTP Transport for Call Home on the Cisco cBR Series Router