Cisco cBR 8 - Monitoring the Usage-Based Billing Feature

Monitoring the Usage-based Billing Feature
To display the most current billing record, use the show cable metering-status command. The following
example shows typical output when usage-based billing is configured to write the billing records to a local
file system:
CMTS01# show cable metering-status
destination complete-time flow cpe status
aggr suppress
disk0:R7519-UBR7246-20000308-004428 Jun 12 09:33:05 No No success
CMTS01#
The following example shows a typical output for the show cable metering-status command when usage-based
billing is configured to stream the billing records to an external server:
Router# show cable metering-status
destination complete-time flow cpe full status
aggr supp rec
10.11.37.2 :1234 Jun 12 09:33:05 No No No success
Router#
The following example shows a typical output for the show cable metering-status command using verbose
option:
Router# show cable metering-status verbose
Last export status
Destination : disk0:sunethra10k-20070129-190423
Complete Time : Jan29 19:04:38
Flow Aggregate : No
Full records : No
Cpe list suppression : No
Source interface : FastEthernet0/0/0
Status of last export : success
Current export status : In progress
The following example shows a typical output for the show cable metering-status command when usage-based
billing is configured to use the IPDR Exporter to stream the billing records to an external server:
Router# show cable metering-status
destination complete-time flow cpe full status
aggr supp rec
IPDR_Session2 Apr12 16:51:15 No No No success
The following example shows a typical output for the verbose form of the show cable metering-status
command when usage-based billing is configured to use the IPDR Exporter to stream the billing records to
an external server:
Router# show cable metering-status
verbose
Last export status
Destination : IPDR_Session2
Complete Time : Apr12 16:51:15
Flow Aggregate : No
Full records :No
Cpe list suppression : No
Source interface : Not defined
Status of last export : success
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration
Guide for Cisco IOS XE Fuji 16.8.x
180
Usage-Based Billing (SAMIS)
Monitoring the Usage-based Billing Feature