Cisco cBR 8 User Manual

PurposeCommand or Action
Example:
Router(config)#
(Optional) Enables logging for deleted SNMP service
flows, which allows the billing feature to include
information about deleted service flows.
cable sflog max-entry number entry-duration time
Example:
Router(config)# cable sflog max-entry 2000
entry-duration 7200
Step 5
Example:
Router(config)#
(Optional) Enables specification of the source-interface
for the billing packets, usually a loopback interface.
cable metering source-interface interface
Example:
Router(config)# cable metering source-interface
loopback100
Step 6
Example:
Router(config)#
Exits global configuration mode and returns to privileged
EXEC mode.
end
Example:
Router(config)# end
Step 7
Example:
Router#
Enabling Usage-based Billing Feature Streaming Mode Using SNMP Commands
This section describes how to use SNMP commands to enable and configure the Usage-based Billing feature
so that it operates in streaming mode, where it regularly transmits the billing records to an external server for
use by the billing application.
To configure the Cisco CMTS for Usage-based Billing feature in streaming mode, you must set a number of
objects in the CISCO-CABLE-METERING-MIB.
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration
Guide for Cisco IOS XE Fuji 16.8.x
142
Usage-Based Billing (SAMIS)
Enabling Usage-based Billing Feature Streaming Mode Using SNMP Commands

Cisco cBR 8 Specifications

General

Brand	Cisco
Model	cBR 8
Category	Network Router
Language	English