In addition, to include information about deleted service flows (DOCSIS 1.1 service flows only) in the
billing records, you must enable the logging of deleted service flows, using the cable sflog global
configuration command. See the Cisco IOS CMTS Cable Command Reference Guide on Cisco.com:
Note
Cisco CMTS Cable Command Reference
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration Guide
for Cisco IOS XE Fuji 16.8.x
143
Usage-Based Billing (SAMIS)
Enabling Usage-based Billing Feature Streaming Mode Using SNMP Commands
To Next Page
Loading...
Need help?
General
