Name: Cisco IE 3000
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

5-10

Cisco IE 3000 Switch Software Configuration Guide

OL-13018-01

Chapter 5 Configuring Cisco IOS CNS Agents

Configuring Cisco IOS Agents

Step 7

discover {controller controller-type | dlci

[subinterface subinterface-number] | interface

[interface-type] | line line-type}

Specify the interface parameters in the CNS connect

profile.

• For controller controller-type, enter the controller

type.

• For dlci, enter the active data-link connection

identifiers (DLCIs).

(Optional) For subinterface subinterface-number,

specify the point-to-point subinterface number that is

used to search for active DLCIs.

• For interface [interface-type], enter the type of

interface.

• For line line-type, enter the line type.

Step 8

template name [ ... name] Specify the list of CNS connect templates in the CNS

connect profile to be applied to the switch configuration.

You can specify more than one template.

Step 9

Repeat Steps 7 to 8 to specify more interface parameters

and CNS connect templates in the CNS connect profile.

Step 10

exit Return to global configuration mode.

Step 11

hostname name Enter the hostname for the switch.

Step 12

ip route network-number (Optional) Establish a static route to the Configuration

Engine whose IP address is network-number.

Command Purpose

Cisco IE 3000 User Manual

Other manuals for Cisco IE 3000