Cisco IE 3000 User Manual

Contents
xiii
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-01
Configuring VMPS 13-23
Understanding VMPS 13-24
Dynamic-Access Port VLAN Membership 13-24
Default VMPS Client Configuration 13-25
VMPS Configuration Guidelines 13-25
Configuring the VMPS Client 13-25
Entering the IP Address of the VMPS 13-26
Configuring Dynamic-Access Ports on VMPS Clients 13-26
Reconfirming VLAN Memberships 13-27
Changing the Reconfirmation Interval 13-27
Changing the Retry Count 13-28
Monitoring the VMPS 13-28
Troubleshooting Dynamic-Access Port VLAN Membership 13-29
VMPS Configuration Example 13-29
CHAPTER 14 Configuring VTP 14-1
Understanding VTP 14-1
The VTP Domain 14-2
VTP Modes 14-3
VTP Advertisements 14-3
VTP Version 2 14-4
VTP Pruning 14-4
Configuring VTP 14-6
Default VTP Configuration 14-6
VTP Configuration Options 14-7
VTP Configuration in Global Configuration Mode 14-7
VTP Configuration in VLAN Database Configuration Mode 14-7
VTP Configuration Guidelines 14-8
Domain Names 14-8
Passwords 14-8
VTP Version 14-8
Configuration Requirements 14-9
Configuring a VTP Server 14-9
Configuring a VTP Client 14-11
Disabling VTP (VTP Transparent Mode) 14-12
Enabling VTP Version 2 14-13
Enabling VTP Pruning 14-14
Adding a VTP Client Switch to a VTP Domain 14-14
Monitoring VTP 14-16

Cisco IE 3000 Specifications

General

Operating Temperature	-40 to 75°C (-40 to 167°F)
DRAM	128 MB
Flash Memory	32 MB
Uplink Ports	2 x 10/100/1000Base-T or SFP
MAC Address Table Size	8000
Mounting	DIN rail, Wall