Contents
xviii
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-01
Configuring IGMP Snooping 21-6
Default IGMP Snooping Configuration 21-6
Enabling or Disabling IGMP Snooping 21-7
Setting the Snooping Method 21-8
Configuring a Multicast Router Port 21-9
Configuring a Host Statically to Join a Group 21-9
Enabling IGMP Immediate Leave 21-10
Configuring the IGMP Leave Timer 21-10
Configuring TCN-Related Commands 21-11
Controlling the Multicast Flooding Time After a TCN Event 21-11
Recovering from Flood Mode 21-12
Disabling Multicast Flooding During a TCN Event 21-12
Configuring the IGMP Snooping Querier 21-13
Disabling IGMP Report Suppression 21-14
Displaying IGMP Snooping Information 21-15
Understanding Multicast VLAN Registration 21-16
Using MVR in a Multicast Television Application 21-17
Configuring MVR 21-19
Default MVR Configuration 21-19
MVR Configuration Guidelines and Limitations 21-19
Configuring MVR Global Parameters 21-20
Configuring MVR Interfaces 21-21
Displaying MVR Information 21-22
Configuring IGMP Filtering and Throttling 21-23
Default IGMP Filtering and Throttling Configuration 21-24
Configuring IGMP Profiles 21-24
Applying IGMP Profiles 21-25
Setting the Maximum Number of IGMP Groups 21-26
Configuring the IGMP Throttling Action 21-26
Displaying IGMP Filtering and Throttling Configuration 21-28
CHAPTER
22 Configuring Port-Based Traffic Control 22-1
Configuring Storm Control 22-1
Understanding Storm Control 22-1
Default Storm Control Configuration 22-3
Configuring Storm Control and Threshold Levels 22-3
Configuring Small-Frame Arrival Rate 22-5