Cisco IE 3000 User Manual

Contents
xix
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-01
Configuring Protected Ports 22-6
Default Protected Port Configuration 22-6
Protected Port Configuration Guidelines 22-7
Configuring a Protected Port 22-7
Configuring Port Blocking 22-7
Default Port Blocking Configuration 22-7
Blocking Flooded Traffic on an Interface 22-8
Configuring Port Security 22-8
Understanding Port Security 22-9
Secure MAC Addresses 22-9
Security Violations 22-10
Default Port Security Configuration 22-11
Port Security Configuration Guidelines 22-11
Enabling and Configuring Port Security 22-12
Enabling and Configuring Port Security Aging 22-17
Displaying Port-Based Traffic Control Settings 22-18
CHAPTER 23 Configuring LLDP and LLDP-MED 23-1
Understanding LLDP and LLDP-MED 23-1
Understanding LLDP 23-1
Understanding LLDP-MED 23-2
Configuring LLDP and LLDP-MED 23-3
Default LLDP Configuration 23-3
Configuring LLDP Characteristics 23-4
Disabling and Enabling LLDP Globally 23-4
Disabling and Enabling LLDP on an Interface 23-5
Configuring LLDP-MED TLVs 23-6
Monitoring and Maintaining LLDP and LLDP-MED 23-7
CHAPTER 24 Configuring CDP 24-1
Understanding CDP 24-1
Configuring CDP 24-2
Default CDP Configuration 24-2
Configuring the CDP Characteristics 24-2
Disabling and Enabling CDP 24-3
Disabling and Enabling CDP on an Interface 24-4
Monitoring and Maintaining CDP 24-4

Cisco IE 3000 Specifications

General

Operating Temperature	-40 to 75°C (-40 to 167°F)
DRAM	128 MB
Flash Memory	32 MB
Uplink Ports	2 x 10/100/1000Base-T or SFP
MAC Address Table Size	8000
Mounting	DIN rail, Wall