Cisco IE 3000 - Page 732

Index
IN-10
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-01
downloading
configuration files
preparing B-10, B-13, B-16
reasons for B-8
using FTP B-13
using RCP B-17
using TFTP B-11
image files
deleting old image B-27
preparing B-25, B-28, B-32
reasons for B-23
using CMS 1-2
using FTP B-29
using HTTP 1-2, B-23
using RCP B-33
using TFTP B-25
using the device manager or Network
Assistant
B-23
DSCP 1-8, 1-9, 32-2
DSCP input queue threshold map for QoS 32-14
DSCP output queue threshold map for QoS 32-16
DSCP-to-CoS map for QoS 32-53
DSCP-to-DSCP-mutation map for QoS 32-54
DSCP transparency 32-35
DTP 1-7, 13-14
dual-purpose uplinks
defined 11-4
LEDs 11-4
link selection 11-4, 11-11
setting the type 11-11
dynamic access ports
characteristics 13-3
configuring 13-26
defined 11-3
dynamic addresses
See addresses
dynamic auto trunking mode 13-15
dynamic desirable trunking mode 13-15
Dynamic Host Configuration Protocol
See DHCP-based autoconfiguration
dynamic port VLAN membership
described 13-24
reconfirming 13-27
troubleshooting 13-29
types of connections 13-26
Dynamic Trunking Protocol
See DTP
E
editing features
enabling and disabling 2-7
keystrokes used 2-7
wrapped lines 2-9
ELIN location 23-3
enable password 9-3
enable secret password 9-3
encryption, CipherSuite 9-39
encryption for passwords 9-3
environment variables, function of 4-19
error-disabled state, BPDU 18-2
error messages during command entry 2-5
EtherChannel
automatic creation of 33-4, 33-5
channel groups
binding physical and logical interfaces 33-3
numbering of 33-3
configuration guidelines 33-9
configuring Layer 2 interfaces 33-10
default configuration 33-9
described 33-2
displaying status 33-16
forwarding methods 33-6, 33-12
IEEE 802.3ad, described 33-5
interaction
with STP 33-9
with VLANs 33-10