Cisco IE 3000 - Page 743

Index
IN-21
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-01
PAgP (continued)
VTP domain 14-8
path cost
MSTP 17-20
STP 16-18
PC (passive command switch) 6-9
performance, network design 1-12
performance features 1-3
persistent self-signed certificate 9-38
per-VLAN spanning-tree plus
See PVST+
physical ports 11-2
PIM-DVMRP, as snooping method 21-8
ping
character output description 34-9
executing 34-9
overview 34-9
policed-DSCP map for QoS 32-52
policers
configuring
for each matched traffic class 32-44
for more than one traffic class 32-47
described 32-3
displaying 32-67
number of 32-30
types of 32-8
policing
described 32-3
token-bucket algorithm 32-8
policy maps for QoS
characteristics of 32-44
described 32-7
displaying 32-67
nonhierarchical on physical ports
described 32-8
port ACLs, described 30-2
Port Aggregation Protocol
See EtherChannel
port-based authentication
accounting 10-8
authentication server
defined 10-2
RADIUS server 10-2
client, defined 10-2
configuration guidelines 10-20
configuring
802.1x authentication 10-23
guest VLAN 10-31
host mode 10-26
inaccessible authentication bypass 10-34
manual re-authentication of a client 10-27
periodic re-authentication 10-26
quiet period 10-28
RADIUS server 10-25
RADIUS server parameters on the switch 10-24
restricted VLAN 10-32
switch-to-client frame-retransmission
number
10-29
switch-to-client retransmission time 10-28
default configuration 10-19
described 10-1
device roles 10-2
displaying statistics 10-42
EAPOL-start frame 10-5
EAP-request/identity frame 10-5
EAP-response/identity frame 10-5
encapsulation 10-3
guest VLAN
configuration guidelines 10-12, 10-13
described 10-11
host mode 10-7
inaccessible authentication bypass
configuring 10-34
described 10-13
guidelines 10-22
initiation and message exchange 10-5
magic packet 10-15