EasyManuals Logo

Cisco ME 3800X User Manual

Cisco ME 3800X
628 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #315 background imageLoading...
Page #315 background image
-39
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show controllers ethernet-controller
Examples This is an example of output from the show controllers ethernet-controller command for an interface.
Table 2-8 describes the Transmit fields, and Table 2-9 describes the Receive fields.
Switch# show controllers ethernet-controller gigabitethernet0/1
Transmit GigabitEthernet0/1 Receive
1279800 Bytes 2788787 Bytes
0 Unicast frames 12058 Unicast frames
4050 Multicast frames 14779 Multicast frames
0 Broadcast frames 1195 Broadcast frames
0 Dot1Q frames 0 Dot1Q frames
0 Too old frames 771712 Unicast bytes
0 Deferred frames 1934854 Multicast bytes
0 MTU exceeded frames 82221 Broadcast bytes
0 FCS errors 0 FCS errors
0 1 collision frames 0 Alignment errors
0 2 collision frames
0 3 collision frames 0 Oversize frames
0 4 collision frames 0 Undersize frames
0 5 collision frames 0 Collision fragments
0 6 collision frames
0 7 collision frames 12071 Minimum size frames
0 8 collision frames 13917 65 to 127 byte frames
0 9 collision frames 0 128 to 255 byte frames
0 10 collision frames 2044 256 to 511 byte frames
0 11 collision frames 0 512 to 1023 byte frames
0 12 collision frames 0 1024 to 1518 byte frames
0 13 collision frames 0 Overrun frames
0 14 collision frames
0 15 collision frames
0 Pause frames 0 Pause frames
0 Excessive collisions 0 Symbol error frames
0 Late collisions 0 Invalid frames, too large
0 VLAN discard frames 0 Valid frames, too large
0 Excess defer frames 0 Invalid frames, too small
0 64 byte frames 0 Valid frames, too small
0 127 byte frames
0 255 byte frames 0 Too old frames
4050 511 byte frames 0 Valid oversize frames
0 1023 byte frames 0 System FCS error frames
0 1518 byte frames
0 Too large frames
0 Good (1 coll) frames
0 Good (>1 coll) frames
Table 3-8 Transmit Field Descriptions
Field Description
Bytes The total number of bytes sent on an interface.
Unicast Frames The total number of frames sent to unicast addresses.
Multicast frames The total number of frames sent to multicast addresses.
Broadcast frames The total number of frames sent to broadcast addresses.
Too old frames The number of frames dropped on the egress port because the packet aged out.
Deferred frames The number of frames that are not sent after the time exceeds 2*maximum-packet time.
MTU exceeded frames The number of frames that are larger than the maximum allowed frame size.
1 collision frames The number of frames that are successfully sent on an interface after one collision occurs.
2 collision frames The number of frames that are successfully sent on an interface after two collisions occur.

Table of Contents

Other manuals for Cisco ME 3800X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ME 3800X and is the answer not in the manual?

Cisco ME 3800X Specifications

General IconGeneral
BrandCisco
ModelME 3800X
CategorySwitch
LanguageEnglish

Related product manuals