Cisco ME 3800X User Manual

-129
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show pagp
This is an example of output from the show pagp 1 internal command:
Switch> show pagp 1 internal
Flags: S - Device is sending Slow hello. C - Device is in Consistent state.
A - Device is in Auto mode.
Timers: H - Hello timer is running. Q - Quit timer is running.
S - Switching timer is running. I - Interface timer is running.
Channel group 1
Hello Partner PAgP Learning Group
Port Flags State Timers Interval Count Priority Method Ifindex
Gi0/1 SC U6/S7 H 30s 1 128 Any 16
Gi0/2 SC U6/S7 H 30s 1 128 Any 16
This is an example of output from the show pagp 1 neighbor command:
Switch> show pagp 1 neighbor
Flags: S - Device is sending Slow hello. C - Device is in Consistent state.
A - Device is in Auto mode. P - Device learns on physical port.
Channel group 1 neighbors
Partner Partner Partner Partner Group
Port Name Device ID Port Age Flags Cap.
Gi0/1 switch-p2 0002.4b29.4600 Gi0/1 9s SC 10001
Gi0/2 switch-p2 0002.4b29.4600 Gi0/2 24s SC 10001
Related Commands Command Description
clear pagp Clears PAgP channel-group information.

Cisco ME 3800X Specifications

General

Brand	Cisco
Model	ME 3800X
Category	Switch
Language	English