Cisco Nexus 5000 Series - Show Cdp Global

show cdp global
To display the Cisco Discovery Protocol (CDP) global parameters, use the show cdp global command.
show cdp global
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.5.0(3)N2(1)
Examples
This example shows how to display the CDP global parameters:
switch# show cdp global
Global CDP information:
CDP enabled globally
Refresh time is 60 seconds
Hold time is 180 seconds
CDPv2 advertisements is enabled
DeviceID TLV in System-Name(Default) Format
switch#
Related Commands
DescriptionCommand
Enables CDP on the switch.cdp
Cisco Nexus 5000 Series Interfaces Command Reference
99
Show Commands
show cdp global