Cisco Nexus 5000 Series - Show Port-Channel Capacity

show port-channel capacity
To display the total number of EtherChannel interfaces and the number of free or used EtherChannel interfaces,
use the show port-channel capacity command.
show port-channel capacity
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.4.0(0)N1(1a)
Examples
This example shows how to display the EtherChannel capacity:
switch# show port-channel capacity
Port-channel resources
768 total 29 used 739 free 3% used
switch#
Related Commands
DescriptionCommand
Configures the load-balancing algorithm for
EtherChannels.
port-channel load-balance ethernet
Displays Cisco Technical Support information about
EtherChannels.
show tech-support port-channel
Cisco Nexus 5000 Series Interfaces Command Reference
143
Show Commands
show port-channel capacity