Cisco Nexus 5000 Series - Show Tech-Support Poe

show tech-support poe
To display the troubleshooting information for Power over Ethernet (PoE) ports, use the show tech-support
poe command.
show tech-support poe
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.5.0(3)N2(1)
Examples
This example shows how to display the troubleshooting information for PoE ports:
switch# show tech-support poe
Related Commands
DescriptionCommand
Enables PoE ports on the switch.power inline
Displays the running configuration information about
PoE ports.
show running-config poe
Cisco Nexus 5000 Series Interfaces Command Reference
174
Show Commands
show tech-support poe