Cisco Nexus 5000 Series - Show Cdp Traffic

show cdp traffic
To display the Cisco Discovery Protocol (CDP) traffic statistics, use the show cdp traffic command.
show cdp traffic interface {ethernet slot / port| mgmt mgmt-num}
Syntax Description
Displays CDP traffic statistics for an interface,
Ethernet or management.
interface
Displays CDP traffic statistics for an Ethernet
interface. The slot number is from 1 to 255 and the
port number is from 1 to 128.
ethernet slot /port
Displays CDP traffic statistics for a management
interface. The management interface number is 0.
mgmt mgmt-num
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.5.0(3)N2(1)
Examples
This example shows how to display the CDP traffic statistics for an Ethernet interface:
switch# show cdp traffic interface ethernet 1/29
----------------------------------------
Traffic statistics for Ethernet1/29
Input Statistics:
Total Packets: 3203
Valid CDP Packets: 3203
CDP v1 Packets: 0
CDP v2 Packets: 3203
Invalid CDP Packets: 0
Unsupported Version: 0
Checksum Errors: 0
Malformed Packets: 0
Output Statistics:
Total Packets: 3203
CDP v1 Packets: 0
CDP v2 Packets: 3203
Send Errors: 0
switch#
Cisco Nexus 5000 Series Interfaces Command Reference
105
Show Commands
show cdp traffic