Cisco Nexus 5000 Series - High-Performance Host-Netio (Virtual Ethernet Interface)

high-performance host-netio (virtual Ethernet interface)
To turn on high performance on the host, use the high-performance host-netio command. To disable high
performance, use the no form of this command.
high-performance host-netio
no high-performance host-netio
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Virtual Ethernet interface configuration mode
Command History
ModificationRelease
This command was introduced.5.1(3)N1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to enable high performance on the host:
switch# configure terminal
switch(config)# interface vethernet 1
switch(config-if)# high-performance host-netio
switch(config-if)#
Related Commands
DescriptionCommand
Displays virtual Ethernet interface configuration
information.
show interface vethernet
Displays the running configuration information for
an interface.
show running-config interface
Cisco Nexus 5000 Series Interfaces Command Reference
42
H Commands
high-performance host-netio (virtual Ethernet interface)