Cisco Nexus 5000 Series - Show Port-Security

show port-security
To display the port security configuration on an interface, use the show port-security command.
show port-security [address [interface {ethernet slot / port| port-channel channel-num}]| interface
{ethernet slot / port| port-channel channel-num}| state]
Syntax Description
(Optional) Displays the secure MAC address of a
port.
address
(Optional) Displays the secure address for an
interface.
interface
(Optional) Displays the secure address for an Ethernet
interface. The slot number is from 1 to 255 and the
port number is from 1 to 128.
ethernet slot/port
(Optional) Displays the secure address for an
EtherChannel interface. The channel number is from
1 to 4096.
port-channel channel-num
(Optional) Displays whether a port is secure.state
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.5.1(3)N1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the port security configuration on an interface:
switch# show port-security
Total Secured Mac Addresses in System (excluding one mac per port) : 0
Max Addresses limit in System (excluding one mac per port) : 8192
----------------------------------------------------------------------------
Secure Port MaxSecureAddr CurrentAddr SecurityViolation Security Action
(Count) (Count) (Count)
----------------------------------------------------------------------------
Cisco Nexus 5000 Series Interfaces Command Reference
157
Show Commands
show port-security