Cisco Nexus 5000 Series - ARP Processing with vPC; Layer 3 Forwarding to Peer MAC Address

clear lacp counters
To clear the Link Aggregation Control Protocol (LACP) counters, use the clear lacp counters command.
clear lacp counters [interface port-channel channel-num]
Syntax Description
(Optional) Clears the LACP counters of a specific
interface.
interface
(Optional) Specifies a port channel interface. The
range is from 1 to 4096.
port-channel channel-num
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.4.0(0)N1(1a)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to clear all LACP counters:
switch# clear lacp counters
This example shows how to clear the LACP on a port channel:
switch# clear lacp counters interface port-channel 100
Related Commands
DescriptionCommand
Displays LACP information.show lacp
Cisco Nexus 5000 Series Interfaces Command Reference
16
C Commands
clear lacp counters